WITH EFFECT FROM THE ACADEMIC YEAR 2013 - 2014
ME 433
CAE LAB
Instruction 3 Periods per week
Duration of University Examination 3 Hours
University Examination 50 Marks
Sessional 25 Marks
1. Analysis of Plane Truss & Spatial Truss with various cross sections and materials to determine member forces, member strains & stresses, joint deflections under static , thermal and combined loading
2. 2D & 3D beam analysis with different sections, different materials for different loads (forces and moments) with different end supports
3. Static analysis of plate with a hole to determine the deformations, the Stresses to study the failure behavior and SCF.
4. Plane stress, plane strain and axisymmetric loading on the in plane members with in plane loading to study the stresses and strains.
5. Static analysis of connecting rod with tetrahedron and brick elements
6. Static Analysis of flat and curved shell due to internal pressure and moments to estimate the strains, stresses and reactions forces and moments with different boundary conditions
7. Buckling analysis of plates, shells and beams to estimate BF and modes
8. Modal analysis of beams, plates and shells for natural frequencies and mode shapes
9. Harmonic analysis of a Shaft subjected to periodic force and transient analysis of plate subjected to stepped and ramped loading with varying time
10. Steady state heat transfer Analysis Cross section of chimney and transient heat transfer analysis of solidification of castings.
11. Non linear analysis of cantilever beam with non-linear materials at tip moment and post Buckling analysis of shells for critical loads
12. Coupled field analysis.
13. Flow analysis of pipe with different fluids/gasses/air for velocity and pressure gradients
14. CFD analysis of aerofoil design
15. CFD analysis of ducts/impeller/fan
16. Use of MATLAB for finding B matrix, stiffness matrix and loading matrices of beam/in plane/solid elements and interfacing with CAE software’s
Note:
1. Any of FEA software ANSYS/ABAQUS/NASTRAN/NISA/ CAEFEM/ADINA may be used
2. Any 12 experiments to be conducted