Department of Mechanical Engineering
Consultancy
|
3.4 Consultancy Statement - DEPARTMENT OF MECHANICAL ENGINEERING
S. No |
Org. |
Name of the Project |
Supply Order Number & Date |
Cost In Rs |
Date of Completion |
Project Coordinators |
1 |
Advanced Systems Lab, DRDO |
Consultancy services for canister instrumentation |
ASL/DD2/RCI/R/IP/0213/08/115/1025 Dt: 15/05/2009 |
4,58,000 |
May 2010 |
1.Dr.D.Hanumantha Rao 2.Prof.KSR.Murthy (ECE) |
2 |
DRDL, DRDO |
Study on optimum analysis of composite structure |
DRDL/21/15/K/2009/236/184P Dt: 20/04/2010 |
1,45,000 |
July 2010 |
1.Dr.M.Madhavi 2.Prof.KSR Murthy (ECE)
|
3 |
Advanced Systems Lab, DRDO |
Design and testing of sensing mechanism for pyro bolt operation |
ASL/DD2/R/DD21/0105/10/1234/1033 Dt:31/05/2011 |
5,18 000 |
Dec., 2012 |
1. Dr.D.HanumanthRao 2. Prof.KSRMurthy (ECE) |
4 |
M/s. CNC Techniques, Pvt .Ltd., Hyd. |
Design and analysis of composite CNG cylinder
|
CNC/MVSR/C/10/12-13 Aug. 2012 |
20,000/ |
Dec., 2012 |
1. Dr.M. Madhavi |
5 |
M/s. CNC Techniques Pvt .Ltd., Hyd. |
Composite cylinder analysis |
CNC/MVSR/C/07/13-14, May 2013 |
15,000- |
July 2013 |
1. Dr.M. Madhavi
|
6 |
DRDL,DRDO Hyd. |
Investigation on composite structures ( Buckling analysis) |
DRDL/21/15/K/2013/243/62OP June 2013 |
2,00,000 |
July 2014 |
1. Dr.Madhavi 2.G.Prakasham 3.Prof.Ksr.Murty (ECE) |
7. |
M/s.Hinduja National Power Corporation Limited, Vizag |
Structural Saddle Support of CW Piping. |
October, 2015 |
- |
Nov. 2015 |
Dr.C.V.Kameswara Rao |
8. |
M/s. CNC Techniques, Pvt .Ltd., Hyd |
Composite Monopole Subjected to Wind Pressures in accordance with IS875(Part3)-1987. |
CNC/C/43/15-16 Dec. 2015 |
30,000- |
May-2016 |
1. Dr.M.Madhavi 2. Mr.K.Karthik Rajashekar |
9. |
M/s. Shalin Composites India, Mumbai. |
Design & Analysis of Filament Wound Pressure Vessel |
SCIPL/MVSREC/04-17-01 July 2017 |
20,000- |
May 2017 |
1. Dr.M.Madhavi 2. Mr.K.Karthik Rajashekar |
10 |
M/s. CNC Techniques, Pvt .Ltd., Hyderabad |
Design of Composite Structures: Drive Shafts, Chimney, High Pressure Tank. |
CNC/UNIT-I WORK ORDER/01®17-18 Nov., 2017 |
70,800/ |
In progress |
1. Dr.PA.Sastry 2. Dr..M.Madhavi 3. A.Syam Prasad 4. K. Rajasekhar,
|